Job Title:

Frames Durability | CAE Analyst – I

Experience:

• 4 – 8 Years

Qualification:

• B.E/B.Tech or M.E/M.Tech (Mechanical & Automotive Engineer)

No. of Positions:

• 2

Job Location:

• Chennai

Domain Knowledge:

• FE Model Review
• Task coordination skills
• Good knowledge on Automobile components and connection between assemblies.
• Good communication skills for customer & team interactions
• Good knowledge on Strength of materials

Job Description:

Looking for analysts who are capable in performing.

• Strength analysis using Abaqus
• Static & Dynamic Fatigue analysis for sheet metal and seam welds using any fatigue solver
• Preload analysis
• Stiffness analysis
• Knowledge in Frequency response & Transient Response analysis using Nastran

Job Title:

Dimensional Engineer

Experience:

• 4 – 8 Years

Qualification:

• B.E/B.Tech (Automotive Engineer)

No. of Positions:

• 3

Job Location:

• Bangalore

Job Description:

• Identify Critical Characteristics and document on drawings, based on analytical results.
• Perform comparison studies of measured data versus objectives and GD&T specification MCR’s/Nom Shift/Tol Relief.
• Research and analyze data such as RSS, specifications, component tooling tolerances to determine design feasibility.
• Define and document quality goals (dimensional and functional) by developing quality objective targets on key product criteria.
• Coordinate all Datum schemes (locator logic) and assembly.
• Perform variation reduction and dimensional sensitivity studies and document.
• Monitor and control the dimensional objective documents.
• Measurement point and fixture certification data generation.
• Responsible for obtaining dimensional requirements for interfacing parts to develop system level analyses.
• Work with inspection fixture suppliers to develop concepts, ensure fabrication of fixtures meet specifications and certify fixtures.
• Purchased parts – responsible to provide dimensional approval for tool texturing authorization.
• Participate in fit validation activities, root cause and define solutions.
• Work effectively in a team environment with a cross-functional team: design, tooling, CAE, quality, manufacturing.
• Check and approve final released GD&T components and assembly drawings.

Requirements:

• Vehicle Dimensional Product Engineering experience: Minimum of 4 years’ experience. (ex: Instrument Panels, Door trim, Floor Consoles, Garnish).
• Expert working knowledge of GD&T (ASME/ANSI/ISO).
• Proficient at RSS stacks: roll up and roll down.
• Energetic personality: Self starter with a high passion for success.
• Proficient in using Catia and/or NX: 2D and 3D.
• Excellent organization and planning skills.
• Excellent communication skills in English.

Job Title:

Costing Engineer

Experience:

• 6 – 10 Years

Qualification:

• B.E/B.Tech (Mechanical Engineer)

No. of Positions:

• 2

Job Location:

• Delhi

Job Description:

• To Perform Should Costing Analysis for the Vehicle sub-systems which covers the commodities Plastics, Sheetmetal, Castings, Forgings and Machining
• Well versed with cost calculations using Excel sheets
• Cost Reports matrix and summary preparation.

Requirements:

Candidate Should have:

• Excellent experience in performing Should Costing analysis for automotive domain systems.
• Minimum 6 to 10 years of experience
• Costing experience with commodities like Plastics, Sheet metal, Castings, Forgings, Machinings
• Well versed with Tonnage Calculations, Cycle time calculations, Welding calculations etc.,
• Excellent communication skills and Presentation skills

Benefits:

• Exposure to OEM work experience

Job Title:

Complete Seat Design Engineer

Experience:

• 4 – 8 Years

Qualification:

• B.E/B.Tech or M.E/M.Tech (Mechanical Engineer)

No. of Positions:

• 1

Job Location:

• Hyderabad

Job Description:

• Lead the complete design and development of automotive seating systems, including seat structures, mechanisms (recliners, adjusters, etc.), trim covers, comfort systems (foam, heating, ventilation), and safety features (head restraints, seat belts integration). Develop and manage the complete seat Bill of Materials (BOM).
• Generate and maintain detailed 3D CAD models and 2D drawings.
• Conduct feasibility studies, packaging analysis, and tolerance stack-ups to ensure design viability and manufacturability.
• Collaborate closely with cross-functional teams, including styling, ergonomics, safety, manufacturing, and suppliers, to ensure seamless integration of the seat system with the overall vehicle architecture.
• Develop and execute design validation plans (DVP&R) to verify and validate seat performance against customer requirements, industry standards, and regulatory specifications.
• Troubleshoot design issues, identify root causes, and implement effective solutions.
• Support prototype build and testing activities, providing technical guidance and resolving any design-related concerns.
• Stay abreast of the latest trends, technologies, and regulations related to automotive seating design and materials.
• Prepare technical reports, presentations, and documentation to communicate design concepts, analysis results, and project status.
• Participate in design reviews and provide constructive feedback.
• Mentor and guide junior engineers as needed.

Job Title:

Chassis Durability | CAE Analyst – II

Experience:

• 6 – 10 Years

Qualification:

• B.E/B.Tech or M.E/M.Tech (Mechanical Engineer)

No. of Positions:

• 1

Job Location:

• Chennai

Job Description:

• Construct high-quality durability CAE assembly models for chassis and suspension systems, including the precise definition of constraints and load cases
• Perform comprehensive stiffness, strength, and durability analyses to ensure component integrity and performance
• Apply advanced durability CAE methodologies to support the development and optimization of suspension subsystems and components
• Partner with Chassis systems and component departments to provide analytical support for product development and engineering problem-solving
• Work closely with D&R engineers to enhance model predictability, correlation, and validation efforts
• Execute model-to-test correlations to verify subsystem functionality and ensure simulation accuracy
• Analyze and interpret complex simulation results, draw data-driven conclusions, and provide detailed technical documentation
• Effectively communicate technical findings, project updates, and recommendations to all cross-functional stakeholders

Requirements:

• Proficiency in Finite Element Analysis (FEA) and durability software, specifically Abaqus, nCode
• Extensive experience with pre-processing and meshing tools such as HyperWorks / ANSA, complemented by exposure to CATIA and 3DEXPERIENCE platform
• Experience navigating PLM environments to manage engineering data, with Siemens Team center preferred
• Deep technical understanding of chassis systems, including suspension and mounting subsystems
• Proven ability to develop high-fidelity CAE models and perform rigorous model-to-test correlations in collaboration with physical testing teams

Job Title:

CFD Modeler

Experience:

• 2 – 4 Years

Qualification:

• B.E/B.Tech or M.E/M.Tech (Mechanical Engineer)

No. of Positions:

• 4

Job Location:

• Chennai

Skill set:

• ANSA, CFD

Domain Knowledge:

• Very Good knowledge in Fluid Dynamics & Aerodynamics
• Knowledge of Automotive components.

Job Description:

• Experience in CFD Modeling in Automotive Domain for Aerodynamics, Thermal & Conjugate Heat Transfer
• Experience in ANSA for CAD cleanup and building the relevant models
• Experience Underhood & Top Hat modeling
• Knowledge in downloading CAD from Teamcenter
• Work in an Agile fashion to speed up project delivery and improve project quality
• Effectively communicate the progress, issues and results to the team daily
• Good Attitude with very good team spirit
• Good Communication and inter-personal skills

Job Title:

CFD Modeler

Experience:

• 1 – 3 Years

Qualification:

• B.E/B.Tech or M.E/M.Tech (Mechanical Engineer)

No. of Positions:

• 7

Job Location:

• Chennai

Job Description:

• EXPERT ANSA CFD modeling experience IS MANDATORY.
• Experience in Full Vehicle Thermal System Model build.
• Knowledge of various rubber and plastic parts and their modeling strategy for thermally sensitive regions.
• Knowledge of Part Structure Management in ANSA.
• Full Vehicle Integration with all model build checks.
• Knowledge of all subsystems and their functioning.
• Good communication skills and interpersonal skills are MANDATORY
• Effectively communicate the progress, issues to the team daily.
• Good attitude with good team spirit is MUST.

Job Title:

CFD Analyst

Experience:

• 4 – 10 Years

Qualification:

• B.E/B.Tech or M.E/M.Tech (Mechanical Engineer)

No. of Positions:

• 1

Job Location:

• Chennai

Job Description:

• We are seeking a detail-oriented and innovative SPEOS Lighting Engineer to join our team. In this role, you will be responsible for the digital verification of all exterior lighting surfaces using Ansys SPEOS software. You will be pivotal in supporting the virtual verification of lighting system’s appearance and performance, ensuring our products meet the highest standards of quality and design.

Major Duties & Responsibilities:

• Lead the implementation of SPEOS digital tools for lighting verification.
• Develop and execute exterior lighting studies by setting up 3D CAD models, defining optical properties, and running simulations with appropriate sources and sensors.
• Generate comprehensive reports in predetermined formats and views to guide design decisions.
• Manage and maintain a collaboration site, ensuring seamless information flow.
• Collaborate with cross-functional teams to ensure lighting systems are optimized for both performance and energy efficiency

Requirements:

• Bachelor’s degree in Engineering, or a related field.
• Proven experience with optical simulation software, specifically Ansys SPEOS.
• Strong proficiency in 3D CAD software CATIA, NX & Preprocessing tools like ANYS SPACECLAIM & ANSA
• Excellent problem-solving skills and attention to detail.
• Ability to manage multiple projects and priorities effectively.
• Strong communication skills, with the ability to convey technical information clearly.

Job Title:

CAE-Analyst/Sr.Analyst/Specialist

Experience:

• 3 – 8 Years

Qualification:

• B.E/B.Tech (Mechanical Engineer)

No. of Positions:

• 2

Job Location:

• Hyderabad

Job Description:

• Looking for a skilled and motivated CAE Engineer with expertise in FE modelling, Structural Durability and crash analysis for automotive components. The ideal candidate should have solid understanding of mechanical engineering principles.

Key Responsibilities:

• Generate and refine FE models while ensuring accuracy and efficiency.
• Work on pre-processing activities for structural and explicit ls dyna environments for occupant safety systems.
• Conduct quality checks on meshes and ensure adherence to best practices
• Understand and implement meshing methodologies to improve model efficiency.
• Interpret mechanical drawings and apply engineering knowledge in meshing activities.
• Document meshing processes and results for project reporting.

Required Skills & Qualifications:

• Product knowledge of Automotive occupant safety systems(Airbags (Majorly ) & Seat belts); Experience on ¿Airbag Meshing, folding, deployment studies, test correlations, Seat belts structural integrity ; Experience on System and sub- system level simulations; Proficiency in PAM Crash, Sim- Fold, LS-Dyna, HyperMesh, – Experience of working in Airbags is preferred.
• 2 to 8 years of experience in Airbag related FEM skills listed above
• Bachelor’s degree in Mechanical Engineering or related field
• Good experience in CAE meshing and modeling, particularly using HyperMesh
• Knowledge of ls dyna deck updates with the meshed model.
• Strong understanding of mechanical engineering concepts and FE modeling
• Good analytical and problem-solving skills
• Ability to work independently as well as in a team environment

Preferred Qualifications:

• Exposure to automotive, aerospace, or industrial domain CAE projects
• Basic knowledge of scripting in HyperMesh (TCL) is an advantage
• Experience with linear and nonlinear analysis workflows

Job Title:

CAE- Sr. Analyst/Specialist

Experience:

• 3 – 8 Years

Qualification:

• B.E/B.Tech (Mechanical Engineer)

No. of Positions:

• 1

Job Location:

• Hyderabad

Job Description:

• Experience on Dummy injury evaluations, Sled simulations, & Occupant safety Crash simulations
• Product knowledge of Automotive occupant safety systems(Airbags)
• Experience on Airbag Meshing, folding, deployment studies, LIP test correlations, Module component structural integrity.
• Experience on System (Vehicle) and sub- system level simulations
• Proficiency in PAM Crash, Sim- Folder, LS-Dyna, HyperMesh

Requirements:

• Experience on Dummy injury evaluations, Sled simulations, & Occupant safety Crash simulations
• Product knowledge of Automotive occupant safety systems(Airbags)
• Experience on Airbag Meshing, folding, deployment studies, LIP test correlations, Module component structural integrity
• Experience on System (Vehicle) and sub- system level simulations
• Proficiency in PAM Crash, Sim- Folder, LS-Dyna, HyperMesh
• Good presentation skills Good problem solving and analytical ability Good knowledge of problem physics and engineering principles Excellent organizational, communication (Especially English) and teamwork skills good team player, experience in dealing with customers