sdfsdf

Request a Call

Company Overview Company Overview

Open positions Electrical / Embedded - Onsite, USA

Operations | Detroit, Michigan, USA


Multiple openings in each position


Qualification – B.E. / M.E in Mechanical/Electrical/ Electronics

DAT2 Sensor Fusion/Feature Software Engineer - ADAS:
Experience – 2 years to 7 years
No Of open positions – 1

Desired Profile:
  • Should have minimum 2+ years of experience in software development in C or C++
  • Lead the development and implementation of algorithms related to image processing and sensor fusion
  • Support the development of active safety features
  • Lead the development of algorithm specifications, FMEAs, robustness disciplines and DVP
  • Understand the performance requirements for the sensing system, establish feature model to operate with the sensor performance envelop and establish procedures to verify performance both quantitatively and subjectively
  • Understand sensor system interactions in terms of vehicle dynamics to identify possible improvements and trade-offs. Identify changes needed to improve performance and meet objectives
  • Establish algorithm objectives and ensure system operation to meet the objectives through structured component, sub-system, and system level test methodologies
  • Work with the Ford Hardware in the Loop Team to establish CAE procedures to reduce dependence on vehicle level testing
  • Support Sign off of algorithm performance per a given vehicle
  • An understanding of embedded software development
  • Experience in image processing and/or sensor fusion to support active safety features
  • Understanding of embedded hardware and software design
  • Control algorithm development using Matlab, Simulink or equivalent
  • Software architecture, modular application development with Model/software, strong embedded experience, developing production algorithm experience
  • 1+ years of experience as an Applications engineer for active safety systems such as ACC, AEB, LKA, TJA, Collision Avoidance, Anti-Lock Braking, Yaw Stability Control or Pre-Activated Restraint Systems
  • Should hold a Valid – H1B stamped Visa


  • DAT2 Feature Software Engineer - ADAS:
    Experience – 2 years to 7 years
    No Of open positions – 1

    Desired Profile:
  • Should have minimum 2+ years of experience in software development in C or C++
  • New Active safety Feature owner, Lead the design, development related to ADAS features
  • Lead the development of Feature specifications, FMEAs, robustness disciplines and DVP
  • Understand the performance requirements for the sensing system, establish feature model to operate with the sensor performance envelop and establish procedures to verify performance both quantitatively and subjectively
  • Understand sensor system interactions in terms of vehicle dynamics to identify possible improvements and trade-offs. Identify changes needed to improve performance and meet objectives
  • Establish Feature objectives and ensure system operation to meet the objectives through structured component, sub-system, and system level test methodologies
  • Work with the Ford Hardware in the Loop Team to establish CAE procedures to reduce dependence on vehicle level testing
  • Support Sign off of Feature Level performance per a given vehicle
  • An understanding of embedded software development
  • Understanding of embedded hardware and software design
  • Control algorithm development using Matlab, Simulink or equivalent
  • Software architecture, modular application development with Model/software, strong embedded experience, developing production algorithm experience
  • 1+ years of experience as an Applications engineer for active safety systems such as ACC, AEB, LKA, TJA, Collision Avoidance, Anti-Lock Braking, Yaw Stability Control or Pre-Activated Restraint Systems
  • Design and development of radar, image processing or similar digital signal processing applications. Modeling / analyzing / simulating radar and/ or vision and/or Lidar sensor performance
  • Developing and conducting laboratory and vehicle tests. Data collection and analysis of Active Safety sensor systems
  • Should hold a Valid – H1B stamped Visa


  • DAT2 SW Verification and Validation - ADAS:
    Experience – 3 years to 9 years
    No Of open positions – 1

    Desired Profile:
  • Should have minimum 3+ years of experience in the verification and validation of embedded SW
  • Lead/support the verification and validation of the SW related to ADAS
  • Understand Feature specifications, FMEAs, robustness disciplines and DVP
  • Understand the performance requirements for the sensing system and its interactions with the features, and establish procedures to verify performance both quantitatively and subjectively
  • Define the test setup needs in terms of benches and hardware in the loop systems that could be used conduct V&V
  • Define test procedures and test plans and execute the same during the project, per the timing needs of the project
  • Support issue resolution of SW related issues
  • Work with the Ford Hardware in the Loop Team to establish procedures to reduce dependence on vehicle level testing
  • Understanding of embedded hardware and software design
  • Control algorithm development using Matlab, Simulink or equivalent
  • Experience in development in C
  • Experience with using hardware in the loop systems and with test bench setup
  • Experience with debuggers, Canalyzers and similar test equipment
  • Some experience with collection and analysis data for driver assistance technologies
  • Should hold a Valid – H1B stamped Visa


  • DAT2 Treerunner SW Build - ADAS:
    Experience – 3 years to 9 years
    No Of open positions – 1

    Desired Profile:
  • Should have minimum 3+ years of experience in software development in C or C++
  • Lead the build and integration of SW for the NXP Treerunner
  • Develop a specification to provide to the supplier for the build environment
  • Support development of a plan for in-house experimental SW builds
  • Understand the Treerunner SW architecture and all the components of the SW that are required at different stages of the program
  • Use QNX configuration and development tools to integrate application software components with basic software
  • Verify the operation of the build on test benches
  • Utilize the SW development and build process and tools for configuration management and debugging
  • Experience with Simulink and code generators
  • An understanding of embedded software development
  • Experience with QNX and related tools
  • Understanding of embedded hardware and software design
  • Software architecture, modular application development with Model/software, strong embedded experience, developing production algorithm experience
  • Understanding of the active safety functions
  • Should hold a Valid – H1B stamped Visa


  • DAT2 Aurix SW Build - ADAS:
    Experience – 5 years to 10 years
    No Of open positions – 1

    Desired Profile:
  • Should have minimum 5 + years of experience in software development in C or C++
  • Lead the build and integration of SW for the Aurix
  • Develop a specification to provide to the supplier for the build environment
  • Support development of a plan for in-house experimental SW builds
  • Understand the Aurix SW architecture and all the components of the SW that are required at different stages of the program
  • Use AUTOSAR configuration and development tools to integrate application software components with basic software
  • Verify the operation of the build on test benches
  • Utilize the SW development and build process and tools for configuration management
  • Experience with Simulink and code generators
  • An understanding of embedded software development
  • Experience with AUTOSAR and related tools
  • Understanding of embedded hardware and software design
  • Software architecture, modular application development with Model/software, strong embedded experience, developing production algorithm experience
  • Understanding of the active safety functions
  • Should hold a Valid – H1B stamped Visa


  • HVAC / CLIMATE CONTROL

    HIL – Component HIL testing - HVAC/Climate Control:
    Experience – 6 years to 10 years
    No Of open positions – 1

    Desired Profile:
  • Should have minimum of 6 plus years of experience in HIL testing of HVAC
  • Experience required in Vector CAN & CAPL scripting
  • Should have strong knowledge of Automobile HVAC system
  • Worked on Climate control module (CCM) Work experience in Embedded coding – Software/Hardware
  • Excellent communication, creative and independent as well as team player
  • Skill Set: Matlab, Simulink, Stateflow, M-scripting, MIL, MBD
  • Should hold a Valid – H1B stamped Visa

  • Apply Now